Muse Gadget board
Home Assistant Voice Preview Edition — Muse Gadget board
Short answer
Home Assistant Voice Preview Edition is listed in the official ESP32 SDK for Meta’s Muse Gadgets as “Status on the LED ring, push-to-talk, volume dial”. It uses ESP32-S3 with None (12-LED ring). Check the capabilities and limits below, then follow this board’s SDK configuration. This page summarizes official sources; it does not certify or test the hardware.
What it suits
Status on the LED ring, push-to-talk, volume dial. The official feature list includes Home-network tunnel; Shows status on: Light ring; Push-to-talk; Speaker and mic; Buttons: Centre (talk), dial.
Limits to know
- No image display, settings UI or over-the-air updates.
Build and pair, in short
1. Build for this board
Use ESP-IDF 6.0.1 from the SDK esp32 directory. Build this board with tools/board.sh home-assistant-voice build; its configuration selects the chip and board overlay.
tools/board.sh home-assistant-voice build
2. Pair with Muse
Provide an SDK token, then enable Developer mode in Muse Settings > Devices and add the gadget over Bluetooth LE. Confirm on the device with the centre talk button and select its Wi-Fi network.
Use the official guide for flashing and recovery steps. This site has not built, flashed or paired this board.