ESP32-C5 DevKitC-1
Status light and button
Muse Gadget board
ideaspark ESP32 with 1.9" display — Muse Gadget board
Short answer
ideaspark ESP32 with 1.9" display is listed in the official ESP32 SDK for Meta’s Muse Gadgets as “Status on screen, images”. It uses ESP32 with 1.9" 170×320 LCD. Check the capabilities and limits below, then follow this board’s SDK configuration. This page summarizes official sources; it does not certify or test the hardware.
What it suits
Status on screen, images. The official feature list includes Shows status on: Screen; Images from Muse; Buttons: BOOT.
Limits to know
- No PSRAM or home-network tunnel.
- No audio, push-to-talk, settings UI or over-the-air updates.
Build and pair, in short
1. Build for this board
Use ESP-IDF 6.0.1 from the SDK esp32 directory. Build this board with tools/board.sh ideaspark build; its configuration selects the chip and board overlay.
tools/board.sh ideaspark build
2. Pair with Muse
Provide an SDK token, then enable Developer mode in Muse Settings > Devices and add the gadget over Bluetooth LE. Confirm on the device with BOOT and select its Wi-Fi network.
Use the official guide for flashing and recovery steps. This site has not built, flashed or paired this board.