Muse Gadget board
Seeed reTerminal E1001 — Muse Gadget board
Short answer
Seeed reTerminal E1001 is listed in the official ESP32 SDK for Meta’s Muse Gadgets as “Status on a 7.5" e-paper, black and white images”. It uses ESP32-S3 with 7.5" 800×480 black and white e-paper. Check the capabilities and limits below, then follow this board’s SDK configuration. This page summarizes official sources; it does not certify or test the hardware.
What it suits
Status on a 7.5" e-paper, black and white images. The official feature list includes Home-network tunnel; Shows status on: E-paper; Images from Muse: Black and white; Buttons: Green.
Limits to know
- The e-paper display renders black and white only, with slower refreshes and a brief flash when an image updates.
- No audio, push-to-talk, settings UI or over-the-air updates.
Build and pair, in short
1. Build for this board
Use ESP-IDF 6.0.1 from the SDK esp32 directory. Build this board with tools/board.sh reterminal-e1001 build; its configuration selects the chip and board overlay.
tools/board.sh reterminal-e1001 build
2. Pair with Muse
Provide an SDK token, then enable Developer mode in Muse Settings > Devices and add the gadget over Bluetooth LE. Confirm on the device with the green button and select its Wi-Fi network.
Use the official guide for flashing and recovery steps. This site has not built, flashed or paired this board.