Seeed SenseCAP Indicator
Status on a 4" screen, images
Muse Gadget board
Espressif ESP32-S3-BOX-3 — Muse Gadget board
Short answer
Espressif ESP32-S3-BOX-3 is listed in the official ESP32 SDK for Meta’s Muse Gadgets as “UI, touch, push-to-talk, settings, images”. It uses ESP32-S3 with 2.4" 320×240 LCD, touch. Check the capabilities and limits below, then follow this board’s SDK configuration. This page summarizes official sources; it does not certify or test the hardware.
What it suits
UI, touch, push-to-talk, settings, images. The official feature list includes Home-network tunnel; Shows status on: Avatar; Images from Muse; UI and settings; Push-to-talk; Speaker and mic; Touch; Over-the-air updates; Buttons: BOOT/CONFIG (talk).
Limits to know
- The capacitive home button, dock sensors, SD card, IR and battery telemetry are not integrated.
Build and pair, in short
1. Build for this board
Use ESP-IDF 6.0.1 from the SDK esp32 directory. Build this board with tools/muse/board.sh build box3; its configuration selects the chip and board overlay.
tools/muse/board.sh build box3
2. Pair with Muse
Provide an SDK token, then enable Developer mode in Muse Settings > Devices and add the gadget over Bluetooth LE. Confirm on the device with BOOT/CONFIG and select its Wi-Fi network.
Use the official guide for flashing and recovery steps. This site has not built, flashed or paired this board.
Compare with other boards
Waveshare ESP32-C6-Touch-AMOLED-1.8
UI, push-to-talk with text replies