Espressif ESP32-S3-BOX-3
UI, touch, push-to-talk, settings, images
Muse Gadget board
Seeed SenseCAP Indicator — Muse Gadget board
Short answer
Seeed SenseCAP Indicator is listed in the official ESP32 SDK for Meta’s Muse Gadgets as “Status on a 4" screen, images”. It uses ESP32-S3 with 4" 480×480 LCD. Check the capabilities and limits below, then follow this board’s SDK configuration. This page summarizes official sources; it does not certify or test the hardware.
What it suits
Status on a 4" screen, images. The official feature list includes Home-network tunnel; Shows status on: Screen; Images from Muse; Air sensors: D1S, D1Pro; Buttons: Top.
Limits to know
- Air sensors require the D1S or D1Pro model and Seeed stock RP2040 firmware; the supplied AHT20 must be connected.
- No audio, push-to-talk, settings UI or over-the-air updates.
Build and pair, in short
1. Build for this board
Use ESP-IDF 6.0.1 from the SDK esp32 directory. Build this board with tools/board.sh sensecap-indicator build; its configuration selects the chip and board overlay.
tools/board.sh sensecap-indicator build
2. Pair with Muse
Provide an SDK token, then enable Developer mode in Muse Settings > Devices and add the gadget over Bluetooth LE. Confirm on the device with the top button and select its Wi-Fi network.
Use the official guide for flashing and recovery steps. This site has not built, flashed or paired this board.
Compare with other boards
Waveshare ESP32-C6-Touch-AMOLED-1.8
UI, push-to-talk with text replies