AIPI Lite
UI, push-to-talk, two-button menu, images
Muse Gadget board
M5Stack Cardputer ADV (experimental) — Muse Gadget board
Short answer
M5Stack Cardputer ADV (experimental) is listed in the official ESP32 SDK for Meta’s Muse Gadgets as “UI, GO/Space push-to-talk with text replies, Esc/Enter/arrow menu controls”. It uses ESP32-S3 with 1.14" 240×135 LCD. Check the capabilities and limits below, then follow this board’s SDK configuration. This page summarizes official sources; it does not certify or test the hardware.
What it suits
UI, GO/Space push-to-talk with text replies, Esc/Enter/arrow menu controls. The official feature list includes Shows status on: Avatar; UI and settings: Experimental; Push-to-talk: Text replies (experimental); Speaker and mic: ES8311 (experimental); Buttons: GO/Space (talk), Esc/Enter/arrows (menu).
Limits to know
- Experimental port for Cardputer ADV only.
- No spoken replies, images, home-network tunnel, battery telemetry, typed chat messages or SD/IMU/IR/expansion support.
- Replies may be shortened; the Muse app holds the full conversation.
Build and pair, in short
1. Build for this board
Use ESP-IDF 6.0.1 from the SDK esp32 directory. Build this board with tools/muse/board.sh build cardputer-adv; its configuration selects the chip and board overlay.
tools/muse/board.sh build cardputer-adv
2. Pair with Muse
Provide an SDK token, then enable Developer mode in Muse Settings > Devices and add the gadget over Bluetooth LE. Confirm on the device with Enter and select its Wi-Fi network.
Use the official guide for flashing and recovery steps. This site has not built, flashed or paired this board.
Compare with other boards
M5Stack StickS3
UI, push-to-talk, two-button menu, images
M5Stack StickC Plus2
UI, push-to-talk, two-button menu, images