AIPI Lite
UI, push-to-talk, two-button menu, images
Muse Gadget board
M5Stack StickC Plus2 — Muse Gadget board
Short answer
M5Stack StickC Plus2 is listed in the official ESP32 SDK for Meta’s Muse Gadgets as “UI, push-to-talk, two-button menu, images”. It uses ESP32 with 1.14" 135×240 LCD. Check the capabilities and limits below, then follow this board’s SDK configuration. This page summarizes official sources; it does not certify or test the hardware.
What it suits
UI, push-to-talk, two-button menu, images. The official feature list includes Home-network tunnel; Shows status on: Avatar; Images from Muse; UI and settings; Push-to-talk; Speaker and mic: Buzzer and mic; Battery status: Voltage only; Over-the-air updates; Buttons: Front (talk), side (menu), PWR.
Limits to know
- Replies use a quiet passive buzzer.
- Battery reporting is voltage only; USB and charging state are not detected.
- The IMU, IR, RTC and Grove port are not integrated; the USB bridge uses 230400 baud.
Build and pair, in short
1. Build for this board
Use ESP-IDF 6.0.1 from the SDK esp32 directory. Build this board with tools/muse/board.sh build plus2; its configuration selects the chip and board overlay.
tools/muse/board.sh build plus2
2. Pair with Muse
Provide an SDK token, then enable Developer mode in Muse Settings > Devices and add the gadget over Bluetooth LE. Confirm on the device with the front talk button and select its Wi-Fi network.
Use the official guide for flashing and recovery steps. This site has not built, flashed or paired this board.
Compare with other boards
M5Stack Cardputer ADV (experimental)
UI, GO/Space push-to-talk with text replies, Esc/Enter/arrow menu controls
M5Stack StickS3
UI, push-to-talk, two-button menu, images