Waveshare ESP32-S3-Touch-AMOLED-1.75C
UI, push-to-talk, settings, images
Muse Gadget board
Seeed SenseCAP Watcher — Muse Gadget board
Short answer
Seeed SenseCAP Watcher is listed in the official ESP32 SDK for Meta’s Muse Gadgets as “UI, push-to-talk, settings, images”. It uses ESP32-S3 with 1.45" 412×412 round LCD, touch. Check the capabilities and limits below, then follow this board’s SDK configuration. This page summarizes official sources; it does not certify or test the hardware.
What it suits
UI, push-to-talk, settings, images. The official feature list includes Home-network tunnel; Shows status on: Avatar; Images from Muse; UI and settings; Push-to-talk; Speaker and mic; Touch; Battery status; Over-the-air updates; Buttons: Wheel (press to talk, turn to sleep).
Limits to know
- Back up the unique factory partition before the first flash.
- The CH342 USB bridge requires the paced flashing helper; camera capture is disabled by default and voice messages do not include photo attachments.
Build and pair, in short
1. Build for this board
Use ESP-IDF 6.0.1 from the SDK esp32 directory. Build this board with tools/muse/board.sh build watcher; its configuration selects the chip and board overlay.
tools/muse/board.sh build watcher
2. Pair with Muse
Provide an SDK token, then enable Developer mode in Muse Settings > Devices and add the gadget over Bluetooth LE. Confirm on the device with the wheel and select its Wi-Fi network.
Use the official guide for flashing and recovery steps. This site has not built, flashed or paired this board.
Compare with other boards
Waveshare ESP32-S3-Touch-AMOLED-1.75
UI, push-to-talk, settings, images
M5Stack StopWatch
UI, push-to-talk, settings, images