05Muse Gadget board

Waveshare ESP32-S3-Touch-AMOLED-1.75 — Muse Gadget board

Short answer

Waveshare ESP32-S3-Touch-AMOLED-1.75 is listed in the official ESP32 SDK for Meta’s Muse Gadgets as “UI, push-to-talk, settings, images”. It uses ESP32-S3 with 1.75" 466×466 round AMOLED, touch. Check the capabilities and limits below, then follow this board’s SDK configuration. This page summarizes official sources; it does not certify or test the hardware.

What it suits

UI, push-to-talk, settings, images. The official feature list includes Home-network tunnel; Shows status on: Avatar; Images from Muse; UI and settings; Push-to-talk; Speaker and mic; Touch; Battery status; Over-the-air updates; Buttons: BOOT (talk), PWR.

Build and pair, in short

1

1. Build for this board

Use ESP-IDF 6.0.1 from the SDK esp32 directory. Build this board with tools/muse/board.sh build s3n; its configuration selects the chip and board overlay.

tools/muse/board.sh build s3n

2

2. Pair with Muse

Provide an SDK token, then enable Developer mode in Muse Settings > Devices and add the gadget over Bluetooth LE. Confirm on the device with the BOOT talk button and select its Wi-Fi network.

SourceESP32 README (opens in a new tab)Saved

Use the official guide for flashing and recovery steps. This site has not built, flashed or paired this board.

Projects targeting this board

Compare with other boards

Compare all boards